[discontinued] IoT Starter Kit

Brand: SainSmart.com

[discontinued] IoT Starter Kit

SKU: 101-70-C30

€12,99

Quantity

Ups, 0 verfügbar.

This product aims to be a hotspot in the home, linking smart devices and sensors together. Including a Wi-Fi board and a relay, this IoT kit helps you easily to make a smart home. Aiming at IoT beginners, a step-by-step tutorials is provided.

NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
Can be used to control Arduino electronic components like sensor, module, LEDs; but also control household applications remotely from Android/IOS APP.
The kit comes with step-by-step tutorials and sample code which can save lots of your research and learning time.

SPECIFICATION:

NodeMCU LUA WiFi Module:

Power input: 4.5V ~ 9V (10V MAX), USB-powered
Communication interface voltage: 3.3V
Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
Drive Type: Dual high-power H-bridge driver
Flash size: 4MByte
No need to download resetting
Wireless 802.11 b/g/n standard
WiFi at 2.4GHz, support WPA / WPA2 security mode
Antenna type: Built-in PCB antenna is available
Support STA/AP/STA + AP three operating modes
Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD0: 1 channel ADC
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Remote firmware upgrade (OTA)
Support Smart Link Smart Networking
Working temperature: -40 ℃ ~ + 125 ℃
ESP8266 has IO Pin

SainSmart 2/8 Channels Relay:

5V Relay interface board, and each one needs 15-20mA Driver Current
Equipped with high-current relay, AC 250V 10A ; DC 30V 10A
Standard interface that can be controlled directly by micro-controller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Indication LED’s for Relay output status