ASSEMBLY VIDEO
The soldering tool we used in video: ToolPAC PRO32 Smart Soldering Tool Set
Learning Through Playing
Hands-on Programming, Electronics, and Robotics
Develop Building Skills
Geared towards kids, the InstaBots Kit teaches programming, electronics, and robotics concepts. The building process is critical in developing mechanical skills and teaching electronics fundamentals.
Encourage Imagination
The open-source Arduino architecture makes exploring the endless possibilities of robotics easy and fun.
Simple, Powerful Design
- Versatile and programmable DIY robot kit
- Built-in Arduino Mega board
- Compatible with a variety of shields
- Supports Bluetooth 4.0
Note:
This DIY kit needs assembly. Batteries are not included. Not support Android 7.0 or above
Microcontroller Based on Arduino Mega
Powered by the Arduino Mega board, the SainSmart InstaBots V4 is a versatile, programmable, self-balancing robot. Its open source architecture makes the level of customization nearly limitless.
Bluetooth Wireless Module
The latest version supports Bluetooth control via the iOS and Android apps, allowing learners to monitor and customize configuration parameters from their smartphones or tablets. Simply install the InstaBots app and connect to the Arduino board via Bluetooth.
Simple, Sturdy Chassis
The chassis is simple and tough, making it great for both indoor and outdoor use. Start exploring the possibilities today!
FEATURES
- Self-balancing
- Uses the MPU6050 sensor, which contains a MEMS accelerometer and gyro integrated into the same a chip
- Bluetooth 4.0
- Parameters are easy to adjust in SainSmart’s InstaBots app
- App supports both Android and iOS
- Three digital and three analog input pin connectors for add-on modules (shields)
SPECIFICATIONS
- Size: 7.9 x 2.6 x 4.3" (200 x 65 x 110 mm)
- Weight: 448 g
- Motor: 12V, 126 RPM
- Wheel Diameter: 2.55” (65 mm)
- Voltage Range: 10 V to 13 V (11.1 V is recommended(
- Battery: Li-Po battery (not included)
- Bluetooth Range: 33 to 66 ft (10 to 20 m)
Wiring:
|
Motor |
Connector1 |
Connector2 |
|
Red |
A1 |
BO2 |
|
Black |
A2 |
BO1 |
|
Green |
G |
G |
|
Blue |
5V |
VCC |
|
Yellow |
B |
A |
|
White |
A |
B |
|
Power |
Battery |
|
GND |
CND |
|
5V |
NC |
|
VIN |
11.1V |
WHAT’S IN THE PACKAGE
- 1× MEGA2560 R3 Compatible with Arduino
- 1× SainSmart Proto_Shield V4.0
- 1× Balancing Robot Platform
- 1× BLE 4.0 Module
- 1× TB6612FNG
- 1× MPU 6050 sensor
- 2× Coupling
- 2× Motor Bracket
- 2× Gear Motor
- 2× Wheel
- 2× Wire bundles
- 1× T-type plug
- Assorted screws and nuts
- 1× USB Programming Cable
- 1× Instruction Manual