OVERVIEW
Flexible Vase
DESCRIPTION
SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber.
95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill.
In comparison with most common filaments like PLA and ABS, TPU must be run much slower.
SPECIFICATION
- Material: Rep-Flex TPU - Vacuumed Sealed with desiccant
- Shore Hardness: 95A
- Weight: Net Weight 1kg per roll, total 2kg/4.4lb
- Diameter: 1.75mm (+/- 0.05mm)
- Roundness: 1.75mm (+/- 0.03mm)
- Recommended extruder temperature:195 - 230°C
- Recommended platform temperature: 40 - 60°C
PRINTING TIPS
- Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.
- With bowden extruder you might pay more attention to these tips:
- Print slow 15-30 mm/s Printing speed
- First layer settings. (Height 100% Width 150% speed 50% e.g.)
- Retraction disabled. This would reduce messy, stringing or oozing printing result.
- Increase Multiplier(Optional). set to 1.1 would help the filament bond well.
- Cooling fan on after first layer.
REFERENCE
WHAT'S IN THE PACKAGE
- 2 x SainSmart TPU Flexible Filament 1.75mm 1kg/2.2lb (vacuum sealed)
GALLERY
(Molten Core shoes via @Spoon maker)
(gopro holder via @hovership )
(SD card holder via @Smoldy)