Marke: SainSmart Deutschland

[discontinued] SainSmart RFID UNO R3 Starter Kit mit Motor Servo, LCD, Various Sensors

SKU: 20-013-306
€6,99
Ups, 0 verfügbar.
  • The kit has more than 20 projects.
  • This is the new SainSmart Starter Kit, developed specially for those who are interested in Arduino.
  • A complete set of Arduino's most common and useful electronic components.
  • With the later version SainSmart UNO R3
  • If you need detailed tutorials including project introduction and their source codes, please contact our customer service.
Revision 3 of UNO R3 the board has the following new features:

* 1.0 pinout: added SDA and SCL pins near the AREF pin and two other new pins near the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Sainsmart Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
* Stronger RESET circuit.
* Atmega 16U2 replace the 8U2.

Package List:

1 x UNO R3
1 x Prototype Shield
1 x Mini Breadboard
1 x 1602LCD
1 x USB Cable
2 x Buzzer
6 x Nixie Tube
1 x 74HC595 Chip
1 x Infrared Remote Control
1 x Photoresistor
1 x 5K Potentiometer
1 x 10K Potentiometer
1 x MAX7219 LED Display IC
5 x Small Push-buttons
1 x RGB LED
1 x Tilt sensor
1 x 940nm infrared LED
1 x RGB Model
1 x DC Motor
1 x 5V stepper motor 1 x stepper motor driver test model
1 x water sensor model
1 x Flame Sensor
1 x LM35 temperature sensor
1 x VS1838B Universal Infrared Receiving Head
1 x 830 tie point Breadboard
1 x Micro servo 9G SG90
1 x HC-SR04 Ultrasonic Distance Sensor
1 x opto-couple 1 channel relay
1 x 4 x 4 Matrix Array 16 Key Membrane Switch Keypad
1 x 2.54mm Straight 40 Pin Header
1 x 2.54mm Elbow 40 Pin Header
1 x DC 9v Battery Box including the cable
1 x 8*8 Dot Matrix Display
1 x RFID-RC522 module
1 x Standard S50 IC card
1 x Special-shaped S50 card
1 x Cell Box
1 x joystick
5 x 1K Resistors
5 x 10K Resistors
10 x Big Push-buttons
10 x Red LED
10 x Green LED
10 x Yellow LED
10 x Dupont Line
25 x Jumper wires
20 x 220 Resistors