SPECIFICATION

• Power: 150W.
• Input voltage: DC12V.
• Output voltage: AC 0-110V-172V-200V-220V.
• Quiescent current: about 0.05A.
• Output waveform: high frequency square wave.
• Output frequency: about 20KHZ.
• Protection: none.
• Size: 58*58*28 mm.

WARNING

1. The board belongs to high frequency square AC output; it is not suitable for the inductive appliance, such as motor, fan and coil transformer.
2. While picked up with low-load machines (LED light, mobile phone charger and DVD set-top box), you are suggested to pick up with low voltage point, such as: 172V/110V.
3. You should install a large heat sink to release its long time high-load Module(�00W) work.
4. You could not connect the power inversely. Besides, power supply and power wire should have large enough current. *Do not overload and short-circuit because it without any protections.
5. The number in measured by the output high frequency non-load voltage meter will be a little higher.

Output wiring the following voltages:

• V0--V2=110V.
• V0--V3=175V.
• V0--V4=200V.
• V0--V5=220V.
• V5--V4=20V.
• V5--V3=45V.
• V5--V2=110V.
• V4--V3=28V.
• V4--V2=90V.
• V3--V2=62V.

WHAT'S IN THE PACKAGE

• 1x Boost Power Converter