This is a car chassis made of stainless steel, which is stable and durable. Controlled by UNO R3 or Raspberry Pi, it is a perfect platform to extend your robobtic projects. The rotating speed of motor is up to 350rmp.

• Made of stainless steel, which is stable and durable
• Pre-assembled; sufficient holes are reserved for installing extra parts
• Max. load increases to 8KG
• Code is provided. We will provide a code to work with SainSmart UNO R3

Acrylonitrile Butadiene Styrene (ABS), is a tough and durable thermoplastic. It is one of the most popular and commonly used material on the market.

• Able to stand higher temperature
• Widely used in health care, education, toys, building, automobile, electronics, and anime field
• Diameter: 1.75mm (+/- 0.05mm)
• Heated platform is recommended
• Weight: 1 KG (approximately 2.20 lbs) Spool

Das SIEMENS TC35-Modul ist ein AT-befehlsgesteuertes GSM-Modem über die serielle Schnittstelle (RS232 / TTL-Kommunikation).
Der Quellcode des Programms wird bereitgestellt, damit Käufer das Modul problemlos verwenden und sich schnell mit dem Modul vertraut machen können.
Häufige Anwendungen sind (Senden / Empfangen) SMS-Steuerung, Telefonieren.
Spannungsversorgung: DC 5V
Frequenz: 900 bis 1800

• Hall Effect switch is a high sensitivity hall-effect switch designed for high temperature operation - up to 150°C.
• The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.

• Works great for precision drilling and tapping, electronic assembling, tool-making, hole punching, jewelry engraving, models and mininatures and hobbies
• It feels good in the hand and has a 3-jaw hardened steel keyless chuck, so you don't have to bother with swapping out collets
• The adjustable gripping diameter of this hand drill is 0.2-3.4mm (1/64--9/64 inches); holds very fine drills bits much more snug than the collet vises
• Available for holding small drills, deburrers, wires, files, reamers; also use it to hand drill out the extruder on the 3D Printer when it was jammed; package include: 1 x hand drill 10pcs twist drill bits

This is a special HIFI DAC expansion board designed for the Raspberry Pi B/B+, using TI's DAC chip (PCM5122), using an I2S interface.

• Can be used with audio playback systems (eg: volumio, xbmc system etc.) to build its own network HIFI player
• Provides two kinds of output interfaces to facilitate external amplifiers and other equipment
• It provides LED indicates working status. Red LED for the DAC power indicator (Power normal light), the green LED for the DAC working condition

Wood Filament ist eine Mischung von 40% recyceltem Holz und einem Bindepolymer. Die thermische Festigkeit des Filaments ist ähnlich wie bei PLA und kann zwischen 185 ° C und 230 ° C gedruckt werden.

• Application: Suitable for all CR-10 series 3D printer
• Brass nozzle size:13mm*6mm
• With PTFE liner to match barrel length on original extruder
• Material: Stainless Steel, Brass,aluminum
• Tube Inner Diameter: 2mm / Length: 26mm

IIC LCD1602 display module, a 2 line 16 character LCD module not only set the contrast control knob selector switch also has a backlight and IIC communication interface.

• Able to display text with low power consumption
• Backlight 

Steuerschalter in der Ferne zusammen mit 16-Kanal-Relais!

RJ45-Schnittstelle, über RJ45-Telekommunikationsverbindung zur Netzwerksteuerung.

Unterstützt 16-Kanal-Relais, dh Sie können mehr als 16 verschiedene Geräte gleichzeitig steuern.

Einzigartige doppelte TCP-Verbindungssteuerung, die der obigen Eigenschaft entspricht und lokal als TCP-Server fungiert

Kann durch Client gesteuert werden, wenn eine Verbindung zum Remote-Server als TCP-Client hergestellen ist.