A flyback drive circuit, which is used to drive the ignition coil, as did the Zero Voltage Switching, masses of fans called them "ZVS circuit". This kit is designed for indcution heating to heat or melt the metal.

• Zero voltage switching tesla coil flyback driver board with high power output up to 1000W
• Comes with induction coil designed for induction heating to heat or melt the metal
• Built-in cooling fan
• Only afer connect the coil and load, then you can power on the module, otherwise will damage it
• The induction heating power supply is recommended to use more than 24V 10A switching power supply.
• The greater the voltage, the greater the current, the greater the heating power, the faster the heating rate.

• Microcontroller digital accuracy
• PWM Charge mode
• State of charge (SOC)
• Temperature compensation
• Automatic detection of the voltage
• External temperature sensor
• Remote meter MT-1 shows the working data and condition
• Battery type option
• Battery AH setting
• Charging priority setting
• Modify parameters through four keys
• Electronic protection
• Short circuit protection
• Reverse polarity protection
• Reverse current protection at night
• Over charging or discharging protection
• Over load protection

Smart-MPPT series intelligent MPPT solar controller is programmable and especially for solar light system.The charging efficiency is about 20% higher than the traditional PWM controller, which can make the cost of the whole system much lower.

• Innovative Max Power Point Tracking(MPPT) technology, tracking
• efficiency >99%
• Full digital technology, high charge conversion efficiency up to 96%
• 5 stages time can be adjusted
• Can read parameters and running status
• When BMS power off because of LVD, it can activate the system
• automatically
• Charging target voltage and charging recovery voltage can be set
• Day/Night threshold can adjust automatically
• Remote Unit to configure, with LCD display
• IP67, Strong and durable aluminum case
• Full automatic electronic protect function

This is a class D Digital amplifier board. Maxium output power 2*50w=100w

Smart-MPPT series intelligent MPPT solar controller is programmable and especially for solar light system.The charging efficiency is about 20% higher than the traditional PWM controller, which can make the cost of the whole system much lower.

• Innovative Max Power Point Tracking(MPPT) technology, tracking
• efficiency >99%
• Full digital technology, high charge conversion efficiency up to 96%
• 5 stages time can be adjusted
• Can read parameters and running status
• When BMS power off because of LVD, it can activate the system
• automatically
• Charging target voltage and charging recovery voltage can be set
• Day/Night threshold can adjust automatically
• Remote Unit to configure, with LCD display
• IP67, Strong and durable aluminum case
• Full automatic electronic protect function

• Rated Voltage: 12V DC constant between motor terminals
• Direction of Rotation: CW when viewed from output shaft side
• Operating Temperature and Humidity: Temperature range of -10 °C ~+50 °C, Humidity range of 30%~80%
• Storage Temperature: Temperature range of -20°C~+60°C

Smart-MPPT series intelligent MPPT solar controller is programmable and especially for solar light system.The charging efficiency is about 20% higher than the traditional PWM controller, which can make the cost of the whole system much lower.

• Innovative Max Power Point Tracking(MPPT) technology, tracking efficiency >99%
• Full digital technology, high charge conversion efficiency up to 96%
• 5 stages time can be adjusted
• Can read parameters and running status
• When BMS power off because of LVD, it can activate the system automatically
• Charging target voltage and charging recovery voltage can be set
• Day/Night threshold can adjust automatically
• Remote Unit to configure, with LCD display
• IP67, Strong and durable aluminum case
• Full automatic electronic protect function

This is 150W Mini-type Inverter DC-AC Battery DC 12V 24VTo AC 220V Boost Power Converter

• The board belongs to high frequency square AC output; it is not suitable for the inductive appliance, such as motor, fan and coil transformer.
• While picked up with low-load machines (LED light, mobile phone charger and DVD set-top box), you are suggested to pick up with low voltage point, such as: 172V/110V.
• You should install a large heat sink to release its long time high-load Module(≥100W) work.
• You could not connect the power inversely. Besides, power supply and power wire should have large enough current. *Do not overload and short-circuit because it without any protections.
• The number in measured by the output high frequency non-load voltage meter will be a little higher

• Robotics control
• Home automation
• Power Supply Control
• Other

Dies ist ein 16x2 LCD-Tastaturmodul für Arduino Diecimila Duemilanove, UNO, MEGA1280, MEGA2560. Es integriert mit 6 Tasten.

Einstellbare blaue Hintergrundbeleuchtung
4-Bit-LCD-Bibliothek für Arduino
Stifte heraus für einfaches Anschließen

This product is compatible with raspberry faction B + B motherboard and raspberry send motherboard. B + and B shall be inserted insertion method method compatible, B +'s GPIO 1 foot, the corresponding paragraph B GPIO1 pin on.

• 16x2 LCD monitors, RGB LED, with 5 buttons
• Can be inserted directly on the PI GPIO interface