• Microcontroller digital accuracy
• PWM Charge mode
• State of charge (SOC)
• Temperature compensation
• Automatic detection of the voltage
• External temperature sensor
• Remote meter MT-1 shows the working data and condition
• Battery type option
• Battery AH setting
• Charging priority setting
• Modify parameters through four keys
• Electronic protection
• Short circuit protection
• Reverse polarity protection
• Reverse current protection at night
• Over charging or discharging protection
• Over load protection

Smart-MPPT series intelligent MPPT solar controller is programmable and especially for solar light system.The charging efficiency is about 20% higher than the traditional PWM controller, which can make the cost of the whole system much lower.

• Innovative Max Power Point Tracking(MPPT) technology, tracking
• efficiency >99%
• Full digital technology, high charge conversion efficiency up to 96%
• 5 stages time can be adjusted
• Can read parameters and running status
• When BMS power off because of LVD, it can activate the system
• automatically
• Charging target voltage and charging recovery voltage can be set
• Day/Night threshold can adjust automatically
• Remote Unit to configure, with LCD display
• IP67, Strong and durable aluminum case
• Full automatic electronic protect function

This is a class D Digital amplifier board. Maxium output power 2*50w=100w

Smart-MPPT series intelligent MPPT solar controller is programmable and especially for solar light system.The charging efficiency is about 20% higher than the traditional PWM controller, which can make the cost of the whole system much lower.

• Innovative Max Power Point Tracking(MPPT) technology, tracking
• efficiency >99%
• Full digital technology, high charge conversion efficiency up to 96%
• 5 stages time can be adjusted
• Can read parameters and running status
• When BMS power off because of LVD, it can activate the system
• automatically
• Charging target voltage and charging recovery voltage can be set
• Day/Night threshold can adjust automatically
• Remote Unit to configure, with LCD display
• IP67, Strong and durable aluminum case
• Full automatic electronic protect function

• Rated Voltage: 12V DC constant between motor terminals
• Direction of Rotation: CW when viewed from output shaft side
• Operating Temperature and Humidity: Temperature range of -10 °C ~+50 °C, Humidity range of 30%~80%
• Storage Temperature: Temperature range of -20°C~+60°C

Smart-MPPT series intelligent MPPT solar controller is programmable and especially for solar light system.The charging efficiency is about 20% higher than the traditional PWM controller, which can make the cost of the whole system much lower.

• Innovative Max Power Point Tracking(MPPT) technology, tracking efficiency >99%
• Full digital technology, high charge conversion efficiency up to 96%
• 5 stages time can be adjusted
• Can read parameters and running status
• When BMS power off because of LVD, it can activate the system automatically
• Charging target voltage and charging recovery voltage can be set
• Day/Night threshold can adjust automatically
• Remote Unit to configure, with LCD display
• IP67, Strong and durable aluminum case
• Full automatic electronic protect function

This is 150W Mini-type Inverter DC-AC Battery DC 12V 24VTo AC 220V Boost Power Converter

• The board belongs to high frequency square AC output; it is not suitable for the inductive appliance, such as motor, fan and coil transformer.
• While picked up with low-load machines (LED light, mobile phone charger and DVD set-top box), you are suggested to pick up with low voltage point, such as: 172V/110V.
• You should install a large heat sink to release its long time high-load Module(≥100W) work.
• You could not connect the power inversely. Besides, power supply and power wire should have large enough current. *Do not overload and short-circuit because it without any protections.
• The number in measured by the output high frequency non-load voltage meter will be a little higher

• Robotics control
• Home automation
• Power Supply Control
• Other

Dies ist ein 16x2 LCD-Tastaturmodul für Arduino Diecimila Duemilanove, UNO, MEGA1280, MEGA2560. Es integriert mit 6 Tasten.

Einstellbare blaue Hintergrundbeleuchtung
4-Bit-LCD-Bibliothek für Arduino
Stifte heraus für einfaches Anschließen

This product is compatible with raspberry faction B + B motherboard and raspberry send motherboard. B + and B shall be inserted insertion method method compatible, B +'s GPIO 1 foot, the corresponding paragraph B GPIO1 pin on.

• 16x2 LCD monitors, RGB LED, with 5 buttons
• Can be inserted directly on the PI GPIO interface

With this I2C interface LCD module, you will be able to realize data display via only 2 wires, a great prototyping module.

• Able to display text with low power consumption
• Backlight (White character on Blue background)
• Dupont wire connection