DESCRIPTION

• TB6600 3-Axis stepper motor driver board is equipped with Toshiba TB6600HG driver chip, it can drive 3 stepper motors at the same time. With maximum output of 4.5A current, it's suitable for NEMA17 and NEMA23 stepper motor. It has a 12V power supply which can be used for MACH3 interface board or CNC controller. TB6600 has large driver current, smooth running, quiet small volume with convenient installation. Its high performance is suitable for making CNC machines and other automation equipment.
  
  
• USB controller board comes with Kit 1 and Kit 2. It's easy to use with strong anti-interference ability. You don't need to install any USB drivers, then it can be used after being plugged in the computer, suitable for all versions of Windows. USB controller board support MACH3 various versions of software and it can be used  for making engraving machine control system.
  
  
• 5-Axis parallel breakout board comes with Kit 3 and Kit 4. Like the USB controller board, it also supports MACH3 and other computer software and of course supports parallel port control. This can control up to 5 stepper motor driver. It is easy to tell the input status with LEDs. It can be powered by 5V USB power supply or external power source.

NOTE

• Only compatible with Windows XP and Windows 7 32bit

SPECIFICATION

Selection Guide

Stepper motor

Model:                        57HS76
Number of phases:   2-phase
Number of lines:        4-wire
Phase voltage:          3.08V
Phase current:          2.8A
Resistence:              1.1Ω
Inductance:               3.6mH
Torque:                     1.89N.M(270 Oz-in)
Shaft Diameter:        8mm 0.3inch
Axial length:              21mm 0.8inch
Side length:              57mm 2.2inch
High:                         76mm 3inch
Weight:                    1100g 38.8oz

Switching Power Supply

• the range of AC input voltage is changed by the switch
• high-efficiency, high reliability
• 100% full load burn-in test
• Protections: Short circuit / overload / over voltage / over temperature
• built-in cooling DC fan control
• Working frequency is 25 kHz
• Input Voltage:110V/220V
• Output Voltage:36V
• Output Current:9.7A
• Output Power:350W

WHAT’S IN THE PACKAGE