Marke: SainSmart

[discontinued] CNC TB6600 3-Axis Stepper Motor Driver Board Kit

SKU: 101-60-271
€119,99 FREE SHIPPING
Ups, 0 verfügbar.

This complete kit is typically for automation equipment DIYs.

  • Offers four different kits with different interface controller board to satisfy various needs.
  • Comes with easy-to-assemble basic parts for you to make your own machine. 
  • The TB6600 3-Axis Stepper Motor Driver Board is using TOSHIBA TB6600 HG driver chip and it can effectively drive 3 motors at the same time.
DESCRIPTION

 

  • TB6600 3-Axis stepper motor driver board is equipped with Toshiba TB6600HG driver chip, it can drive 3 stepper motors at the same time. With maximum output of 4.5A current, it's suitable for NEMA17 and NEMA23 stepper motor. It has a 12V power supply which can be used for MACH3 interface board or CNC controller. TB6600 has large driver current, smooth running, quiet small volume with convenient installation. Its high performance is suitable for making CNC machines and other automation equipment.

  • USB controller board comes with Kit 1 and Kit 2. It's easy to use with strong anti-interference ability. You don't need to install any USB drivers, then it can be used after being plugged in the computer, suitable for all versions of Windows. USB controller board support MACH3 various versions of software and it can be used  for making engraving machine control system.

  • 5-Axis parallel breakout board comes with Kit 3 and Kit 4. Like the USB controller board, it also supports MACH3 and other computer software and of course supports parallel port control. This can control up to 5 stepper motor driver. It is easy to tell the input status with LEDs. It can be powered by 5V USB power supply or external power source.
NOTE
  • Only compatible with Windows XP and Windows 7 32bit
SPECIFICATION

Selection Guide

Specificatiion Motor Power Supply Control Board Driver Jumper Wires USB Cable Parallel Cable CD 
Kit 1 No No USB Interface Board TB6600-T3 No 1 PCS No 1 PCS
Kit 2 57HS76 S-350-36 USB Interface Board TB6600-T3 No 1 PCS No 1 PCS
Kit 3 No No Parallel Interface Breakout Board TB6600-T3 XH2.54 3PCS 1 PCS DB25 Male to Male Cable 1 PCS
Kit 4 57HS76 S-350-36 Parallel Interface Breakout Board TB6600-T3 XH2.54 3PCS 1 PCS DB25 Male to Male Cable 1 PCS

 

Stepper motor

    Model:                        57HS76
    Number of phases:   2-phase
    Number of lines:        4-wire
    Phase voltage:          3.08V
    Phase current:          2.8A
    Resistence:              1.1Ω
    Inductance:               3.6mH
    Torque:                     1.89N.M(270 Oz-in)
    Shaft Diameter:        8mm 0.3inch
    Axial length:              21mm 0.8inch
    Side length:              57mm 2.2inch
    High:                         76mm 3inch
    Weight:                    1100g 38.8oz

    Switching Power Supply

    • the range of AC input voltage is changed by the switch
    • high-efficiency, high reliability
    • 100% full load burn-in test
    • Protections: Short circuit / overload / over voltage / over temperature
    • built-in cooling DC fan control
    • Working frequency is 25 kHz
    • Input Voltage:110V/220V
    • Output Voltage:36V
    • Output Current:9.7A
    • Output Power:350W

     

    WHAT’S IN THE PACKAGE
    Specificatiion Motor Power Supply Control Board Driver Jumper Wires USB Cable Parallel Cable CD 
    Kit 1 No No USB Interface Board 1PCS TB6600 1PCS No 1 PCS No 1 PCS
    Kit 2 57HS76 3PCS S-350-36 1PCS USB Interface Board 1PCS  TB6600 1PCS No 1 PCS No 1 PCS
    Kit 3 No No Parallel Interface Breakout Board 1PCS TB6600 1PCS XH2.54 3PCS 1 PCS DB25 Cable 1PCS 1 PCS
    Kit 4 57HS76 3PCS S-350-36 1PCS Parallel Interface Breakout Board 1PCS TB6600 1PCS XH2.54 3PCS 1 PCS DB25 Cable 1PCS 1 PCS